The first walkaround

Heres the body, as recieved. Already mounted on a dolly under the frame. The green stuff is epoxy primer that was applied after sandblasting. The black is gelcoat, the grey is primer, and well you can see how much is just bare steel. Some large sheetmetal patches had been done on the bedsides, the bed floor has been removed (will be replaced with a carbon fiber floor), a custom tailgate with hidden hinges and a wide top has been fabricated and the top rear tips of the bedsides have been extended to match the new contour. The tail lamp panels have been welded in, and the stake pockets have been filled. A custom hood has been installed, and custom console. Hood and fenders are fiberglass. Drip rails have been shaved and door top front corners rounded. Cowl has been filled, and engine compartment modified. Floors have been partially replaced, and new rocker and step plate panels have been quickly installed on one side.